If you have started collecting quotes for a modular kitchen in Bangalore, you have probably noticed the range is enormous. One vendor says ₹1.8 lakh, another says ₹4 lakh, for what looks like the same kitchen. Neither is necessarily cheating you. They are quoting different things, and the differences are hidden inside the carcass, the hardware and the finish, where you cannot see them until years later.
This guide breaks the cost down the way a builder sees it, so you can compare quotes on equal terms and know roughly what your own kitchen should cost before you sign anything.
Get your kitchen estimate in 60 seconds
Pick your layout, material and finish. See a real number, no site visit required.
Calculate my estimate →The short answer
In Bangalore in 2026, a modular kitchen typically costs between ₹1.5 lakh and ₹12 lakh. Most homeowners building a standard kitchen land in a much narrower band. Here is the realistic range by layout, for a quality build using a BWP plywood carcass and branded hardware, excluding countertop, chimney and hob.
| Layout | Typical running feet | Cost range |
|---|---|---|
| Straight kitchen | 8 – 10 ft | ₹1.5 – 2.8 L |
| L-shaped kitchen | 10 – 14 ft | ₹2.5 – 5.0 L |
| Parallel kitchen | 12 – 16 ft | ₹3.0 – 6.0 L |
| U-shaped kitchen | 14 – 18 ft | ₹4.0 – 8.0 L |
| Island kitchen | 16 ft + | ₹6.0 L + |
These are honest mid-market ranges. You can go below them with particle board and unbranded fittings, and well above them with imported acrylic and premium accessories. What follows is what moves you within, and beyond, these numbers.
The four things that actually decide your price
Almost the entire cost of a modular kitchen is woodwork, which is priced by the running foot (or square foot) of cabinetry. Four decisions set that per-foot rate.
1. Layout and total running feet
More cabinetry means more cost, simply. A straight kitchen needs the least; an island or U-shape needs the most. Layout is also the one factor largely fixed by your floor plan, so it sets the baseline everything else multiplies against. If you are working to a budget, an L-shape gives most Bangalore homes the best balance of workspace and cost.
2. Carcass material, the part you never see
The carcass is the box structure of every cabinet. It is hidden behind shutters, so it is the easiest place for a cheap quote to save money, and the most expensive place to be wrong. In Bangalore's humidity, this single choice decides whether your kitchen is solid at year ten or swelling at year three.
- BWP plywood (18mm) — Boiling Water Proof, the right choice for a Bangalore kitchen, especially under the sink and near the hob.
- BWR plywood — Boiling Water Resistant, a step down; acceptable for dry upper units, riskier for the base.
- HDHMR / MDF — smooth and cheaper, but far less forgiving of moisture. Fine for lofts, not ideal for wet zones.
- Particle board — the cheapest, and the reason some quotes look suspiciously low. It does not belong in a kitchen you want to keep.
A good builder specifies the carcass grade in writing in the BOQ before work starts. If a quote does not name the carcass material, that is the first question to ask.
3. Shutter finish, the part you do see
The finish is the visible face of the shutter, and where taste meets budget.
- Laminate — the most affordable, huge variety, genuinely durable. The sensible default for most homes.
- Membrane — seamless single-piece look; practical for heavy Indian cooking as it hides fingerprints.
- Acrylic — high-gloss, premium appearance, easy to wipe, priced accordingly.
- PU lacquer — the luxury end; a hand-finished, furniture-grade surface at the highest cost.
4. Hardware, the part you use 50,000 times
You open a kitchen drawer or cabinet 15 to 20 times a day. Over a decade that is well over 50,000 cycles. Hardware is what decides whether everything still glides at year ten or starts sagging at year three. Branded soft-close hinges and channels from Hettich, Hafele or Blum cost more upfront and are, quietly, the difference between a kitchen that ages well and one that does not. Unbranded hardware is where a low quote often hides its savings.
See your own number, not a range
Our calculator turns these four choices into a real estimate for your kitchen in about a minute.
Calculate my estimate →What is usually included, and what is not
Two quotes at the same price can cover very different things. Before you compare, line up what each one excludes, because the excluded items add up fast.
| Usually included | Usually extra (ask upfront) |
|---|---|
| Base & wall cabinets | Granite or quartz countertop |
| Shutters & handles | Chimney & hob |
| Soft-close hinges | Sink & tap |
| Standard drawer channels | Backsplash tiles |
| Basic internal fittings | Under-cabinet lighting |
How to compare two quotes fairly
- Compare on a per-running-foot basis with identical specs, not on the bottom-line total.
- Match the carcass grade first. BWP against BWP. This is the biggest hidden swing.
- Check the hardware brand is named, not just "branded" or "imported".
- List every exclusion and add it back before you decide which is cheaper.
- Ask for a written BOQ. A vendor who will put the specs on paper is a vendor you can hold to them.
Why a turnkey team can price differently
A typical kitchen touches several hands: a designer, a carpenter, a hardware supplier, sometimes a separate contractor for civil and electrical. Each adds a margin, and those margins stack before you have seen a single cabinet. When one team handles design and execution together, material, hardware and labour are priced as one scope, which removes a layer of stacked markup. That is the model we work with at Wood & Co., and it is a large part of why our estimates read the way they do.
Frequently asked questions
What is the average modular kitchen cost in Bangalore in 2026?
Between ₹1.5 lakh and ₹12 lakh overall. A standard L-shaped kitchen of 10 to 14 running feet with a BWP plywood carcass, laminate finish and branded hardware usually lands between ₹2.5 lakh and ₹5 lakh, excluding countertop, chimney and hob.
How is modular kitchen cost calculated?
Most of the cost is woodwork, priced per running foot of cabinetry. The per-foot rate is set by four things: your layout and total feet, the carcass grade, the shutter finish, and the hardware brand.
Is BWP plywood worth the extra cost?
Yes. In Bangalore's humidity the carcass is the component most likely to fail, and BWP resists moisture far better than BWR or MDF. It is the last place to cut cost, not the first.
What is usually left out of a modular kitchen quote?
Countertop, chimney and hob, sink and tap, backsplash tiles, and under-cabinet lighting are commonly excluded. Always confirm exclusions before comparing two prices.
All prices are indicative 2026 Bangalore ranges for planning purposes and vary with site conditions, exact specifications and design complexity. For a figure specific to your home, use the calculator or ask us for a written BOQ.
Estimate your kitchen now
Free, instant, and built by the team that constructs the home around it.
Calculate my estimate →